Site Information

 Loading... Please wait...
  • DTA SRS Size Extension Wrench Adapter - 7/8" hex socket
  • DTA SRS Size Extension Wrench Adapter - 7/8" hex socket
  • DTA SRS Size Extension Wrench Adapter - 7/8" hex socket

DTA SRS Extension Wrench


Product Description

This rear-entry action wrench is designed to be used with the Desert Tech (TM) SRS size barrel extensions.


  • Suggested installation torque is 75ft-lb for 223 & 308 size case heads; 100ft-lb for Magnum case heads.
  • Patriot Valley Arms strongly suggests the use of a torque wrench during use.
  • Threads and locking faces on the receiver and barrel tenon must be properly lubricated with a high contact pressure lubricant.
  • The hex end of the wrench fits standard 7/8" sockets

The wrench is purposefully designed and manufactured to avoid damaging the extension should too much torque be applied to the hex head. The wrench is considered to be expendable in an abuse event.  This is to avoid damaging a high dollar, custom action.  Damage to the wrench due to mis-use, abuse or negligence is not in any way warrantied by Patriot Valley Arms.  Similarly, damage to a barrel extension thru mis-use, abuse, or neglience with our adapter wrench is also not warrantied in any way.


The wrench is to be inserted completely into the receiver before torque can be applied.  Failure to insert the action all the way forward may result in receiver damage.  The wrench design cannot protect against all events, if users have questions on the wrench and application DO NOT attempt use without discussing with a qualified gunsmith.


Product Reviews

Write Review

  1. Tough, built right... 5 Star Review

    Posted by on Apr 12th 2018

    I have only used mine once so far. Does job, no sign of wear.

Find Similar Products by Category

Click the button below to add the DTA SRS Extension Wrench to your wish list.