Patriot Valley Arms is pleased to offer a selection of pre-machined, custom cut barrels for the discerning rifleman. These barrels are made from only premium-grade match barrel blanks, cut specific to customer request, and they do not require the customer to send in their rifle receiver for fitment. The barrel nut and barrel nut wrench are included with the product as a standard option.
Furthering this product line is the oft-sought after replacement barrel for the Ruger American Rifle, Ruger American Predator Rifle, and the Tikka T3.
The barrels come with our barrel nut and wrench as a standard item.
These barrels are cut with award winning Rock Creek and Spencer/Masterpiece button rifled, lapped and double normalized barrel blanks. (There is a market-price upcharge issued for specific blank requests, contour changes, etc.)
As a standard practice they are delivered with 5/8-24 RH Class 3A muzzle threads for 6mm thru 30 caliber offerings and 1/2-28 for 17, 20, and 22 caliber offerings. Almost any 308-sized case head can be cut for the RPR such as:
22-250, 6.5x47 Lapua, 6.5 Creedmoor, and 6mm XC and associated wildcats of each.
308 Win based calibers
And single-feed long action calibers with the .308 case head (284 Win, 30-06 family, etc)
Common calibers are listed and others may be available upon request.
Please note that not all calibers can be combined with each action selection, if an issue is present at the time work begins then a Patriot Valley Arms representative will contact the customer to clear up any perceived problems.
Customer may order specific blanks and twist rates at an upcharge. The standard barrel blank used is approximately "Light Palma" in contour. This leaves a rifle overall balanced similarly to the factory barrels with enough steel up front to thread the muzzle for suppressor/brake use. Please note that changing the barrel, caliber, or contour is available on special request and the pricing will change.
Any questions for specific applications please send inquiries through our Contact page. Additional calibers include
22-250 Rem, 6mm XC, 6mm x 47 Lapua, 6mm Dasher (Lapua Brass), 6mm Dasher (Norma Brass), 6mm Creedmoor, 243 Win, 6.5mm x 47 Lapua, 6.5mm Creedmoor (Std Match Throat), 6.5mm Creedmoor (Short Match Throat for 130/140gr VLDs), 7mm Creedmoor, 7mm-08, 284 Win (Long Action Throat), 30-06 Springfield (Match Bullet Throat), 6.5-06 (VLD/Hybrid Match throat)
The standard twist rates used are as follows:
22c - 1:8" twist
6mm & 6.5mm - 1:8" twist (the 8tw 6mm has been extensively tested with up to 115gr bullets in 6mm Dasher)
7mm - 1:9" twist
308 - 1:10" twist
Barrels come standard with muzzle threads and a basic knurled thread protector.
22 caliber: 1/2-28 Class 3A threads
6mm thru 30caliber: 5/8-24 Class 3A threads
Tikka T3 Lite prefit
Posted by Eric on Jun 2nd 2017
Great barrel. Installs just like a savage with the barrel nut. It took about 5-6 weeks to arrive, which is super fast for anyone that has waited 4+ months for barrels from other companys. I ordered a medium palma profile, 6.5 creedmoor, 26" barrel. Right off the bat it was shooting 3/8" groups with Hornady 140ELDM factory loads. Add this barrel was FAST! Those Hornady factory loads clocked 2845fps. (verified with two different chronys) My handloads shoot a little tighter groups, and I'm getting 2935fps with 140gr Nosler RDFs (43.2 gr RL16.) I will be buying another!