Choose Your Options
Below are the available bulk discount rates for each individual item when you purchase a certain amount
- Buy 4 - 7 and get 15% off
- Buy 8 - 100 and get 25% off
The 6mm BR cartridge and its variants are legendary in the rifle competition world for their inherent accuracy, easy loading, long barrel life and low cost to shoot. The only hitch was making the cases feed and function in a repeater. Part of the problem is the ejection cycle but for those with actions that can handle the small case feeding them into the chamber is the next issue.
The Patriot Valley Arms magazine conversion kit offers shooters the option to use standard AICS 10rd magazines with new internal components. These kits take only the most modest of tools (a plastic or rubber mallet) and less than a minute of time to convert the magazines back and forth from full length 308 size cartridges to shortened 6 BR type rounds.
The Patriot Valley Arms kits feature anti-tilt legs on the fore and aft ends of the new follower, a guiding channel to keep the follower from "wandering" through the magazine body and rolling left to right during stacking. They also feature Patent Pending DirtSwipe (TM) geometry to aid magazine reliability in dirty, dusty, or otherwise adverse conditions.
These kits are fully CNC machined from high lubricity plastic and feature heat treated, wound wire springs for a lifetime of use. The internal length change supports cases up to ~2.53-2.55" (mag bodies vary from part to part).
This kit is laid out to convert standard AICS magazines to properly feed 6mm BR and associated wildcat rounds. No permanent changes are mafe to the magazine during conversion. The feed lip geometry remains unchanged from factory shape as well. www.patriotvalleyarms.com
Patriot Valley...This kit is laid out to convert standard AICS magazines to pro...
6mm Dasher Mag Kit
Posted by Unknown on Jan 31st 2017
Great Kit. Top notch product. Makes loading ACIS mags with 10 rounds a breeze. Never had a problem feeding 1st through 10. Definitely a winner
6Br mag conversion
Posted by BoB on Jan 12th 2017
Love this product, if you need to feed a BR/dasher from a mag this will do the trick, slick set up and works on 5rnd mags as well! Just get a 5rn aics mag in 308 and with a die grinder with cut off wheel cut the back bone down and take the spring down a little at a time. Feeds perfect will order more
Posted by Gene Christman on Oct 23rd 2016
This is a good solution for the br dasher feeding problem. Very well thought out and executed.
6mm Dasher AICS Mag kit
Posted by Wendell Sullivent on Oct 21st 2016
I must say that this kit fit and functioned perfectly in my 10 rd AICS and Accurate Mag magazines. The thought and design ofr the interlocking follower into the spacer to allow for smooth even pressure on the cartridges from the first to the last is perfect
Posted by Jon on Oct 20th 2016
Super fast shipping and the mag kit was very easy to install. Runs my 6 dasher like butter!