Product Description
This rear-entry action wrench is designed to be used with the Daniel Defense M5 size barrel extensions.
- Suggested installation torque is 75ft-lb for 223 & 308 size case heads; 100ft-lb for Magnum case heads.
- Patriot Valley Arms strongly suggests the use of a torque wrench during use.
- Threads and locking faces on the receiver and barrel tenon must be properly lubricated with a high contact pressure lubricant.
- The hex end of the wrench fits standard 7/8" sockets
- Do not exceed 125 ftlb of torque for any reason.
The wrench is purposefully designed and manufactured to avoid damaging the extension should too much torque be applied to the hex head. The wrench is considered to be expendable in an abuse event. This is to avoid damaging the barrel extension. Damage to the wrench due to mis-use, abuse or negligence is not in any way warrantied by Patriot Valley Arms. Similarly, damage to a barrel extension thru mis-use, abuse, or negligence with our adapter wrench is also not warrantied in any way.
The wrench is to be inserted completely into the receiver before torque can be applied. Failure to insert the action all the way forward may result in receiver damage. The wrench design cannot protect against all events, if users have questions on the wrench and application DO NOT attempt use without discussing with a qualified gunsmith.